EIB 5000

    Specifications

    Specifications

    EIB 5281

    EIB 5211

    EIB 5181

    Functional safety

    Determined by the connected encoder and subsequent electronics (including their configuration); the EIB has no effect on the safe position

    Encoder input

    Interface

    EnDat 2.1

    EnDat 2.2

    1 VPP/EnDat 2.1/EnDat 2.2

    Ordering designation

    EnDat01/EnDat02

    EnDat229)

    EnDat01/EnDat02/EnDat22

    Electrical connection

    17-pin M23 flange socket (female) with coupling ring

    12-pin M12 flange socket

    25-pin D-sub connector (female)

    Voltage supply of encoder

    The EIB passes the supply voltage from the subsequent electronics to the connected encoder

    Cable length1)

    < 6 m

    < 100 m

    Temperature sensor input

    Quantity

    3

    Connectable sensors2)

    KTY 84-130, PT 1000, PTC, PTC triplet3)

    Evaluation accuracy tolerance

    Typically: ±1 K; maximum: ±2 K

    Time constant for temperature measurement

    Please indicate when ordering

    Set using DIP switches

    Electrical connection

    7-pin M17 flange socket (female)

    6-pin header (male)

    Cable length4)

    < 6 m

    < 20 m

    Control output

    Interface

    EnDat 2.1

    EnDat 2.2

    1 VPP/EnDat 2.1/EnDat 2.2

    Ordering designation

    EnDat01/EnDat02

    EnDat22

    EnDat01/EnDat02/EnDat22

    Electrical connection

    17-pin M23 flange socket (male)

    8-pin M12 flange socket

    25-pin D-sub connector (male)

    Cable length1)

    < 50 m

    < 50 m

    < 3 m

    Supply voltage

    5 V ±10 %5)

    3.6 V ... 14 V

    5 V ±10 %5)

    Power consumption6)

    Typical: 200 mW; max. 300 mW

    Typical: 160 mW; max. 210 mW

    Typical: 250 mW; max. 350 mW

    Temperature output

    Emulation of PT 1000 behavior7)

    Emulation of PT 1000 or KTY84-130 behavior7)

    Emulation accuracy tolerance8)

    Typically: ±3 K; maximum: ±4 K

    Typically: ±3 K; maximum: ±4 K

    Operating temperature

    0 °C to 70 °C

    Storage temperature

    –30 °C to 70 °C

    Vibration 55 Hz to 2000 Hz

    Shock 11 ms

    100 m/s2 (EN 60068-2-6)

    300 m/s2 (EN 60068-2-27)

    10 m/s2 (EN 60068-2-6)

    30 m/s2 (EN 60068-2-27)

    Protection EN 60529

    IP65 (when engaged)

    IP20

    Altitude

    < 2000 m above sea level

    Mass

     0.5 kg

    1) Applies only to HEIDENHAIN cables; be sure to consider the voltage drop

    2) For further information, please refer to Temperature evaluation and Monitoring functions

    3) Please select when ordering; EIB 5181 is configured using DIP switches

    4) Observe the information from the motor manufacturer

    5) Take the supply voltage range of the encoder into account

    6) Without power or current consumption of the encoder; version with switching output: additional power consumption of 50 mW

    7) See Emulation of PT 1000 behavior

    8) Applies to cable lengths < 1 m

    9) The encoder must be designed for connection to the EIB 5211